|
|
|
R-U-Matic Series |
|
Single Spindle Machines |
| Semi-Automatic |
| Manual |
| Pipe & Nipple |
| Double Spindle Machines |
| Semi-Automatic |
| Manual |
| Pipe & Nipple |
| Standard Features |
| Specifications |
R-U-Matic Machine Line
Rebuilders Unlimited Machine Company,
Inc.
| Home |
|
|
|
|
| The
R-U-Matic Thread Cutting Machine is now available in six models: Pipe & Nipple - Manual - Semi Automatic Single and Double Versions |
| Standard Features on All Models |
| BED | HEADSTOCK |
| Heavy steel weldment | Heavy steel weldment |
| Integral coolant reservoir | Helical gears for quiter, more efficient operation |
| Hardened and Ground ways | Heavy duty bearings on drive shafts |
| Externally mounted coolant pump | Precision tapered roller bearings on the spindle(s) |
| Chip compartment with chip removal from either side of the machine | Variable frequency spindle drive |
| Large motor compartment | Speed changes made by the touch of a screen or the turn of a knob |
| Semi-Automatic | Manual | Pipe & Nipple | |
| CAPACITY
(STD) Diameter Thread Length Threads/Inch |
1/2" to 2 1/2" Bolt Up to 16" 4 to 28 |
1/2" to 2 1/2" Bolt Up to 16" 4 to 28 |
1/4" to 2" Pipe Up to 1.058" 11 1/2 to 18 |
| Spindle RPM | 30 to 200 | 30 to 200 | 50 to 300 |
| Spindle Motor | 20 H.P. | 20 H.P. | 10 H.P. |
| Floor Space Required | Approximately 6 1/2 Ft. X 12 Ft. |
Approximately 4 Ft. X 9 Ft. |
Approximately 4 Ft. X 8 Ft. |
| Power Requirements | 480V
- 3 Ph - 60 H 60 Amp. Disc. Sw. 40.22 F.L.A. |
480V
- 3 Ph - 60 H 60 Amp. Disc. Sw. 29.16 F.L.A. |
480V
- 3 Ph - 60 H 30 Amp. Disc. Sw. 14.76 F.L.A. |
| Standard
Equipment
|
Spindle
- VF Drive Ballscrew Carriage Feed Closed Loop Servo System Touchscreen Data Entry Full Diagnostics Automatic Lubrication Hydraulic Front & Workstop Hydraulic Head Open-Close One 20R Style Head All Electrics & Hydraulics |
Spindle
- VF Drive Handwheel Oper. Carriage Handwheel Oper. Carr. Front Trip Rod Head Open - Close One 20R Style Heads All Electrics |
Spindle
- VF Drive Lever Operated Carriage Handwheel Oper. Carr. Front Reamer Mechanism One 16T Style Heads All Electrics |
| Back to top Double |
| Semi-Automatic | Manual | Pipe & Nipple | |
| CAPACITY
(STD) Diameter Thread Length Threads/Inch |
1/2" to 2 1/2" Bolt Up to 16" 4 to 28 |
1/2" to 2 1/2" Bolt Up to 16" 4 to 28 |
1/4" to 2" Pipe Up to 1.058" 11 1/2 to 18 |
| Spindle RPM | 30 to 200 | 30 to 200 | 50 to 300 |
| Spindle Motor | 30 H.P. | 30 H.P. | 15 H.P. |
| Floor Space Required | Approximately 8 1/2 Ft. X 12 Ft. |
Approximately 6 Ft. X 9 Ft. |
Approximately 6 Ft. X 8 Ft. |
| Power Requirements | 480V
- 3 Ph - 60 H 100 Amp. Disc. Sw. 57.49 F.L.A. |
480V
- 3 Ph - 60 H 60 Amp. Disc. Sw. 48.21 F.L.A. |
480V
- 3 Ph - 60 H 60 Amp. Disc. Sw. 31.76 F.L.A. |
| Standard
Equipment
|
Spindle
- VF Drive Ballscrew Carriage Feed Closed Loop Servo System Touchscreen Data Entry Full Diagnostics Automatic Lubrication Hydraulic Front & Workstop Hydraulic Head Open-Close Two 20R Style Head All Electrics & Hydraulics |
Spindle
- VF Drive Handwheel Oper. Carriage Handwheel Oper. Carr. Front Trip Rod Head Open - Close Two 20R Style Heads All Electrics |
Spindle
- VF Drive Lever Operated Carriage Handwheel Oper. Carr. Front Reamer Mechanism Two 16T Style Heads All Electrics |
| Back to top |